ODA EX 10000, Брошюра и инструкция по эксплуатации

Страница: 50 / 113

EX Series Operating Manual
3-14. Output ON/OFF
Enables or disables the power supply output. This key toggles between on and off.
Therefore you can acquire the effect of output on/off without remove the connected DUT.
Proceed as follows.
▌Turn on the power supply
After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode.
▌Basic state is output off mode. In other to enable output on,
press the "OUTPUT ON/OFF" key.
▌In other to enable output off ▌In other to enable output off,
press the "OUTPUT ON/OFF" key once more.
≫ Related Remote Interface Command
OUTP {OFF|ON}
OUTP?
Apply : Check what state is Output and when the power supply output state is off , the method of
changing to output on.
OUTP? Return value "0"
Check the output state.(Value "O" means output off state).
OUTP ON Output on.
If you turn on the power supply and the power supply's default of output state is not output off state,
enter to "Factory" Mode and go to "Last State" mode in other to change to disable of "Last State"
And then turn off the power supply and turn on the power supply. You can see the appearing the
"OUTP OFF" display.
Note
- 50 -