ODA EX 10000, Брошюра и инструкция по эксплуатации

Страница: 45 / 113

EX Series Operating Manual
▌By using cursor key, set the "2.DHCP" and then press
the "IO/Local" key. TCP/IP Port setting must be equal with PC.
LCD Display
>port 5000
Or it is differ following before state.
▌You can change the device number by using encoder knob.
▌After changed the TCP/IP port by using cursor key and encoder
switch, and then press the "IO/Local" key.
▌
Appear
"
wait...
" message.
LCD Display wait LCD Display wait...
▌During receiving IP from server, appear "wait…" and it automatically
configures the addressing. When selected, the instrument first tries
to obtainan IP address from a DHCP server and display the IP
address and automatically quit from setting menu.
LCD Display Local ip is 192.168.123.32
▌If the instrument did not obtain the IP within a certain period of time,
after appeared "Time Out Error" message, automatically quit form menu.
* Confirm IP address.
▌Turn on the power supply
After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode.
▌Press "I/O" key in other to set TCP/IP interface.
LCD Display
I/O> 1.RS232C
Or it is differ following before state.
▌Following before state, appears RS232C, RS485, USB and TCP/IP on the
display. If the display is not "4
.TCP/IP
" press the cursor key until changing
to "I/O> 4.TCP/IP" on the display.
LCD Display I/O> 4.tcp/ip
▌Press the "I/O Local" key in other to confirm IP.
LCD Display >1. Static
Or it is differ following before state.
▌Select "3.IP CHECK" by using cursor key.
LCD Display >3. ip check
▌When press the "IO/Local" key appear obtained IP If you want to quit ▌When press the "IO/Local" key, appear obtained IP. If you want to quit,
press "IO/Local" key
LCD Display
>192.168.123.32
Use only standard UTP(LAN) cable.
Note
- 45 -