ODA EX 10000, Брошюра и инструкция по эксплуатации, Страница: 23 / 113

EX Series Operating Manual
9. RS485 Interface Port
The RS485 interface port on the rear panel connects your power supply to the computer and
other RS485 devices(DMM, scope, function, spectrum and etc). It is type of parallel
communicaton interface.
10. USB 2.0 Interface Port
The USB 2.0 interface port on the rear panel connects your power supply to the computer
and other control devices.
11. TCP/IP Port (Option)
The TCP/IP interface port on the rear panel connects your power supply to the internet web of
PC. This type is protocol communication control, and received fixed PI address. So you can
control power supply anywherer in world.
p pp y y
12. Earth Ground Connect Screw
Earth Ground Connect Screw.
13. Isolated Analog Control Connector (Option)
There are voltage/current analog input control, analog output function.And about output
ON/OFF functions, there are TTL positive, TTL negative, press position type, auto recovery
type switch.
14. Parallel IN and OUT Connector (Option)
This is current parallel control in-out connector. You can control up to 5 devices included
master device.
N t 1
It is possible to set the remote interface method by pressing "I/O Local" key on the front-panel.
Note1
- 23 -