ODA EX 10000, Брошюра и инструкция по эксплуатации

Страница: 22 / 113

EX Series Operating Manual
2-2. Rear Panel Composition.
1 8 RS232C Interface Port
2 9 RS485 Interface Port
3 10 USB 2.0 Interface Port
4 11 TCP/IP Port (Option)
5 12
Ventilation Slit Earth Ground Connect Screw
- Output Bus Bars
+ Output Bus Bars
- Voltage Sensing Input Connector
+ Voltage Sensing Input Connector
5 12
6 13
7 14
1. - Output Bus Bars
Negative DC power output bus bar of power supply.
Ventilation Slit Earth Ground Connect Screw
Isolated Analog Control Connector (Option)
Earth Ground Parallel IN and OUT Connector (Option)
AC Power Input Connector
2. + Output Bus Bars
Positive DC power output bus bar of power supply.
3. - Voltage Sensing Input Connector
Input terminal of negative output voltage sensing. For more informaiton, refer to 3-3. Remote
Voltage Sensing.
4. + Voltage Sensing Input Connector
Input terminal of positive output voltage sensing. For more informaiton, refer to 3-3. Remote
Voltage Sensing.
5. Ventilation Slit
A fan cools the power supply by drawing air through the front panel air slit and side air slit and
exhausting it out the rear air slit
exhausting it out the rear air slit.
6. AC Power Input Connector
AC Power Input Connector. Normailly, 220V/50-60Hz AC input is standard. But you can order
other input AC power. Refer to 2-2. Accessories and Options.
7. Earth Ground
Earth Ground Terminal The power supply is shipped with a detachable 3-wire grounding type Earth Ground Terminal. The power supply is shipped with a detachable, 3 wire grounding type
power cord.You have to use this power cord.
8. RS232C Interface Port
Serial port of Personal Computer that is standard.
One on one communication with external controller(for examples, PC,PLC and etc).
- 22 -