ODA EX 10000, Брошюра и инструкция по эксплуатации

Страница: 46 / 113

EX Series Operating Manual
Delimiter
You can choice the sending and responsing data delimiter among LF, CR and CRLF and when we
are shipped, default value is LF. Next is setting procedure
▌Turn on the power supply
" " After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode.
▌In other to change the delimiter, press the "IO/Local" key.
LCD Display
Or it is differ following before state.
▌Press the cursor key until reaching "5.delimiter".
I/O> 5.delimiter
▌ y g
LCD Display
▌If you want to change the delimiter to "CR", press the "IO/Local" key.
LCD Display Or it is differ following before state.
▌
>delimiter cr
>delimiter lf
▌In other to select "CR", press the cursor key and move to "delimiter cr"
After appear "delimiter cr"message, press the "IO/Local" key, after then,
appear "SAVED" message.
LCD Display
→
Response
delimiter cr SAVED
Response
You are able to have the response when you send the commennd to power supply.
When shipped, response function is clear state.
▌Turn on the power supply
After turned on, check the power supply displays"
**OUTPUT OFF**
" Mode.
▌In other to change "Respons" enable or disable, press the "IO/Local" key.
LCD Display
Or it is differ following before state.
▌
Until appearing
"
6.response
", press the cursor key.
LCD Display
> I/O> 1.RS232C
> I/O> 6.response
▌In other to change the "Response" enable, press the "IO/Local" key.
LCD Display Or it is differ following before state.
▌Press the cursor key until appearing "response yes" message.
And in other to be enable, press the "IO/Local" key.
LCD Display
→
> response no
response yes SAVED
- 46 -