Oce TCS300, Руководство пользователя

Страница: 40 / 190

40 Chapter 3 Prepare the Océ TCS300 for use
The energy save mode timer
Set the timers
The energy save mode timer
Introduction
The Océ TCS300 printer has 2 modes to prevent unnecessary power consumption.
■
The energy save mode.
■
The sleep mode.
This section describes the energy save mode.
The energy save mode
The Océ TCS300 printer uses less energy in the energy save mode than in the normal
operating mode.
Both the printer and the Océ Power Logic
®
controller remain turned on.
You can define the following energy save mode settings in the Océ Setting Editor.
[16]
Note: By default, the 'Energy save mode timer on/off' is enabled and the 'Energy
save mode time-out' is set to 5 minutes.
If you must change the default settings in the Océ Settings Editor proceed as follows.
[16] Energy save mode settings in the Océ Setting Editor
'Preferences'- 'System defaults'-
'Sleep mode and energy mode'
'Energy save mode timer on/off' 'Preferences' - 'System defaults'-
'Timers'
'Energy save mode time-out'
On Use this setting to define the delay in
minutes before the Océ TCS300 printer
enters the energy save mode.
Off Not applicable