Oce TCS300, Руководство пользователя

Страница: 132 / 190

132 Chapter 8 Maintain the Océ TCS300 printer
Replace the media
Replace the media
Introduction
The standard configuration of the Océ TCS300 contains two rolls of media . The Océ
TCS300 is also available with one roll or with three rolls. Appendix A contains a list
of the supported media types and media sizes.
This section describes the following.
■
How to remove and load a roll of media .
■
How to change the type of media defined on the system.
When to do
Change a roll when a job needs a media type or size that is not on one of the rolls.
Change the media type that is defined on the system when the defined media type
and the available media type do not correspond.
Before you begin
Navigate to 'Preferences' - 'System defaults' - 'Regional settings' to use the
'Media sizes' setting to define the correct media sizes in the Océ Settings Editor.
How to remove a roll of media
1.
Press the retract button on the right-hand side of the roll.
[69]
[69] Press the retract button
The medium automatically retracts from the printer.
2.
Use both hands to remove the roll.