Oce CS120, Руководство по копированию

Страница: 64 / 381

Selecting the Paper Size (Paper Select) 1-49
The display returns to the Basic Features screen, and the selected paper size is
displayed.
NOTE
.
•
The symbol represents paper that is loaded vertically and the symbol
represents paper that is loaded horizontally. Paper sizes with the suffix R (such as
LTRR) indicate paper that is loaded horizontally in a drawer or the stack bypass.
•
The paper sizes loaded in all paper feeding locations are displayed on the screen.
3
Press (Start).
Copying starts.
NOTE
.
•
To restore the copier’s settings to the standard copy settings, press (Reset).
.
Selecting Paper Loaded in the Stack Bypass
Use the stack bypass for heavy paper or card stock, paper of irregular sizes, or
when paper of the desired size is not loaded in the drawers.
IMPORTANT
.
•
Adjusting the slide guides too tightly or too loosely may cause paper jams or cut-off the
image due to outputting of misaligned copies. When output is continued with the images
cut off using the print controller (optional), it may result in the back of the paper getting
dirty.
•
You can load the following quantity and types of paper in the stack bypass:
- Copy quantity:
1 to approximately 250 sheets (20-lb bond (80 g/m
2
))
1 to approximately 100 sheets (transparencies)
- Paper size: 12" x 18", 11" x 17", LGL, LTR, LTRR,
irregular size paper (7
3
/
16
" x 7
3
/
16
" to 12" x 18" (182 x 182 mm to
305 x 457 mm))
- Paper weight: 17-lb bond to 110-lb index (64 to 209 g/m
2
)
•
Curl down paper before use. There are some types of paper that may meet the above
specifications but cannot feed through the stack bypass if they are curled.
•
Do not load paper of different sizes at the same time.
•
Only use transparencies that are specifically recommended for use with this copier.
Other transparencies may damage the copier.
•
Make sure to immediately remove transparencies or heavy paper that are output onto the
output tray. Failure to do so may result in paper jams.
NOTE
.
•
See “Copying onto Transparencies,” on p. 2-8 for instructions on the correct way to load
transparencies in the stack bypass.
•
For high quality copies, use paper recommended by Canon.
Basic Cop
ying
1