Oce ColorWave 900, Руководство пользователя

Страница: 73 / 320

Define media types and sizes
In Océ Express WebTools you can define what media types and media sizes your print system
supports.
NOTE
The media types and the media sizes are only editable by the Key operator or Power user.
Procedure
1. In Océ Express WebTools navigate to the [Supplies] - [Media types] tab.
2. If necessary, change the list of supported media types for the print system. To enable or disable a
media type from the list, select the media type and click on the according button on top of the list.
NOTE
Do not remove media types from the list. The reinstallation of a removed media type
requires a complete reinstallation of the system software.
The enabled media types are the media types that you can select on the user panel when you
load a media roll (See
Load a media roll on page 66
step 14).
3.
To define the default media type select the media type and click on the [Default] button on top of
the list.
4.
In Océ Express WebTools navigate to the [Supplies] - [Media sizes] tab.
5.
Click on the value of the [Supported media sizes] setting. A new window opens.
6.
You can enable or disable media sizes to fine-tune the system to your environment.
7.
Click [Ok] to confirm your entries or [Cancel] to reject your entries.
NOTE
You cannot disable media sizes that are currently loaded on the printer.
NOTE
When you load a media roll with a size that was not yet enabled in the media series,
the system automatically adds the new media size to the custom media series.
To get an overview of the currently supported media types and sizes see
Overview supported
media types on page 299
.
Define media types and sizes
Chapter 4 - Media handling 73