Objet Eden260, Руководство пользователя

Страница: 38 / 122

Using Objet Studio
5–4
DOC-00260 Rev. A1
5. Select any of the following options, as required:
• Units
—Choose millimeters or inches for the object’s units of measure.
•
Number of copies
—Choose how many copies of this model to place
on the build tray.
• Arrange models
—Select this check box to automatically position
models on the build tray for efficient model building.
Note: The 3-D file contains the object's proportions, but not its units of
measure. Therefore, make sure to correctly select either millimeters or
inches when inserting an object. Otherwise, the size of the object on the
build tray will be either much too large or much too small.
6. Click
Open
.
The dialog box closes and Objet Studio places the model(s) on the build
tray.
You can place additional models on the build tray by repeating this
procedure.
Arranging the Objet Studio Screen
The default screen layout displays the perspective view of the build tray and
the tray hierarchy pane, which lists the elements placed on the tray.
Figure 5-5: 2-view (default) screen layout
You can view models from different angles by changing the default screen
layout.
The Extents values displayed at the bottom of the dialog box represent the
maximum dimensions of the object on each axis. These dimensions
correspond to the virtual “bounding box” surrounding the object (see
figure 5-24 on page 5-17).