Objet Eden260, Руководство пользователя

Страница: 109 / 122

DOC-00260 Rev. A1
7–33
Eden260 User Guide
•
If the replacement head was not factory calibrated, the following
warning screen appears.
Figure 7-52: “No factory data” warning screen
If this happens:
a. Remove the head and replace it with another one (starting with step
11 on page 7 ‐ 28).
b. In the wizard screen, select the check box to confirm that you have
installed another printing head, and click
Next
.
c. Contact Objet customer support about the uncalibrated head.
•
If the vacuum test is not successful, the replacement head was not
sealed properly during installation, and the following warning screen
appears.
Figure 7-53: Vacuum Leakage warning screen
If this happens:
a. Click
Next
.
b. Follow the instructions on the wizard screens to re ‐ install the head.