Objet Alaris30, Руководство пользователя

Страница: 16 / 142

Safety
2–4
DOC-24000 Rev. C
Safety Guidelines
The following general guidelines, together with the instructions provided
throughout this user guide, ensure user safety while operating and
maintaining the Objet30 system. If the system is not operated as specified,
the user ʹ s safety may be compromised!
Printer
Installation
¾
Installation and removal of the Objet30 printer should only be done by
qualified service personnel.
¾
Connect the printer to the electric outlet using a power cord that is
safety ‐ certified.
¾
The electric outlet should be easily accessible, near the printer.
¾
Never connect the power plug to an outlet that does not have a ground
(earth) wire, and never disconnect the ground. Doing so may expose
the operator to serious danger from electric shock.
¾
Leave a minimum of 20 centimeters between ventilation openings and
walls or other objects.
Printer
Operation
¾
The Objet30 printer should only be operated by persons trained by an
Objet customer ‐ support representative.
¾
All personnel operating or maintaining the Objet30 printer should
know the location of first aid and emergency equipment and how to
use it. Never block access to this equipment!
¾
Keep fingers and other body parts clear of the printer cover when
closing it.
¾
Never attempt to open the main cover of the printer while it is working!
¾
Never override the interlock safety switch!
¾
If the interlock safety switch ever fails,
do not use the printer .
¾
Several parts of the printer remain extremely hot even after it has
stopped operating. Avoid touching the UV lamp and the print block.
UV Radiation
¾
The UV lamp used in the printer emits dangerous radiation. If the UV
lamp remains on when the printer cover is open, do not stare directly at
the UV light. Shut down the printer and call your Objet service
provider.
Printer
Maintenance
¾
Service operations should be performed only by qualified personnel
who have been instructed in relevant safety precautions.
¾
Notify co ‐ workers and those who have access to the Objet30 system
before beginning non ‐ routine and hazardous work.
Report any potential dangers and safety-related accidents to your safety
officer or to other appropriate authorities.