Oberheim GM-400, Руководство по эксплуатации

Страница: 20 / 74

Oberheim GM 400
Digital Signal Processor
-
86
-
6. EFFECTS
The chapter which follows describes all the effects in each group. In addition to a brief
description of the characteristics of the effect itself, all the parameters relating to its
programming will be discussed. All the procedures described start from the main edit video
page.
To access the various programming pages, use the EDIT key, while the CURSOR keys and
the VALUE encoder will always be used to modify parameters.
•
USEFUL HINT: When programming, always take care to make proper use of the BYPASS
and COMPARE keys previously described in the EDIT MODE section .
The following is an example of a group edit page:
As stated in the introductory notes, only one effect can be selected from each group. The
effect selected from the group can always be identified because it is the only one which
flashes in the group edit page. To change the selected effect, locate the cursor on the name
of the effect you require using the CURSOR keys and then press the EDIT key. We have
emphasized this procedure because the fact that another effect is flashing might mislead you
unless this operation is confirmed by pressing the EDIT key which will bring you to the effect
edit page: