manualshive.com logo in svg

Oberheim GM-400, Руководство по эксплуатации

Поделиться
Скачать
Oberheim GM-400 Скачать руководство пользователя страница 36

Oberheim GM 400

Digital Signal Processor

- 

102

 -

In contrast with the the Attack parameter, this parameter sets the time for which the effect will
last.

Depth parameter.  Range: 0 - 100

Sets the depth of the modulation.

Level parameter.  Range: 0 - 100

Regulates the level of the output signal in the context of the effects chain.

6.6 SPECIAL EFFECTS 1 (SP1)

This group:

offers the following effects: Wah-Wah, Double Comb Filter, Double Chorus, Fade In.

WAH-WAH

This simulates the well-known effect which sounds exactly like its name.  It is obtained by
means of a filter which is opened and closed automatically by the level of the signal itself, or
by means of a remote pedal.

Trigger parameter.  Range: AUTO PRE, AUTO POST, PEDAL FC1, PEDAL FC2.

Sets the type of control of the effect.  The two Auto options are provided to allow control by the
level of signal present before compression (PRE) or downstream of all the preceding effects
(POST). For pedal control, there is the option of control using Foot Controller 1 (FC1) or Foot
Controller 2 (FC2) of the optional foot-controller unit FC-3000.

Sensitivity parameter.  Range: 0 - 100

Содержание GM-400











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды