background image

Oberheim GM 400

Digital Signal Processor

89

 -

Mode parameter.  Range: Dynamic Loudness, Spectral Compressor, Spectral DeEsser,

    Spectral Exp/Gate, Eq + Compressor, Eq + Expander

Controls the mode in which the effect works.  The functions provided by the modes vary quite
widely.

  Dynamic Loudness - Enhances the frequencies selected in the crossover (see second

editing page) depending on the total level of the input signal.

 Spectral compressor - Compresses the frequencies selected in the crossover with

attenuation recovery.

  Eq + Compressor - combines the equalizer and the compressor.

 Spectral DeEsser - Compresses the frequencies selected in the crossover without

attenuation recovery.

  Spectral Exp/Gate - Expands the frequencies selected in the crossover.

  Eq + Expander - The combination of the equalizer and the expander/gate.

Ratio parameter.  Range:

1:1, 1.2:1, 1.5:1, 2:1, 3:1, 5:1, 10:1, 20:1, 

:1

or

1:1, 1:1.5, 1:2, 1:2.5, 1:3, 1:3.5, 1:4, Gate

depending on the Mode selected.
Sets the compression ratio.

Threshold parameter.  Range: 0 - 45

Regulates the value of the level of the input signal above/below which the
compression/expansion effect is activated.

Level parameter.  Range: 0 - 100

Regulates the level of the output signal in the context of the effects chain.

Bass parameter.  Range: 0 - 100
Middle parameter.  Range: 0 - 100
Treble parameter.  Range: 0 - 100

Regulate the three sections of the crossover frequencies.

Содержание GM-400











































































Отзывы: