Oberheim GM-400, Руководство по эксплуатации

Страница: 19 / 74

Oberheim GM 400
Digital Signal Processor
-
85
-
Press the ENTER/WRITE key with the light constantly on to access the patch memorization
function. The display will show the relative page:
which shows:
•
the current memory location (CURRENT BANK);
•
the destination memory location (DESTIN. BANK). The GM 400 automatically offers the
current location, as shown in the above example.
To modify the BANK and location (LOC), use the CURSOR keys and the VALUE encoder. To
change the NAME, press the flashing UTILITY key to display:
then select the character to be modified using the CURSOR keys and change it using the
VALUE encoder. At this point (whether you are in the location or name modification page)
press the ENTER/WRITE key again to memorization the patch in the destination memory
location. A short message will confirm that the operation has been completed.
•
CAUTION !!: a modification to a patch can be memorized quickly by simply pressing the
ENTER/WRITE key twice in succession .