Oberheim GM 400
Digital Signal Processor
-
95
-
Guitar Amplifer, Bass Amplifer.
GUITAR AMPLIFER
One important component of guitar sounds is the modification of the frequency response
created by the amplifier's cabinet and speakers.
When a multieffect device is connected directly to the mixer of a P.A. system (i.e. without
using the amplifier), this component is lacking. The most noticeable result is the lack of "body"
in the distortions, which become "cold" and "plastic".
Although the GM 400 distortions have also been developed for use "directly", algorithms have
been added to simulate the presence of an amplifier, where the user is enabled to decide both
its construction characteristics and the incidence of the device on the overall sound quality.
Amp Type parameter. Range: DI, V, S, HV
This parameter is used to set the type of amplifier to be simulated. The values this field is
able to assume are:
1 (
DI BOX
):
DI BOX (linear response) simulation
2 (
VALVE
):
Simulation of a valve amplifier
3 (
SOLID STATE
):
Simulation of a transistor amplifier
4 (
HOT VALVE
):
Simulation of a saturated valve amplifier.
Character parameter. Range: 0 - 100
Parameter which sets the incidence of the AMP TYPE parameter in the context of the amp
simulator.
Box Type parameter. Range: 112, 212, 412.
The Box type parameter allows the user to set the type of box with which the amplifier to be
simulated is equipped.
1 (
112
): Simulation of a combo amplifier equipped with one 12 inch speaker
2 (
212
): Simulation of a combo amplifier equipped with two 12 inch speakers
3 (
412
): Simulation of a combo amplifier equipped with four 12 inch speakers
Содержание GM-400
Страница 1: ...VISCOUNT JOINT VENTURE Oberheim GM 400 DIGITAL SIGNAL PROCESSOR OPERATING MANUAL...
Страница 70: ......
Страница 72: ......
Страница 74: ......
