Oberheim GM 400
Digital Signal Processor
-
131
-
Location parameter. Range: 1 - 128, ALL
Allows the user to set the number(s) of the memory location(s) to be transferred. Naturally,
when ALL is selected all the locations of a bank will be transferred together.
Bank parameter. Range: A, B, C, ALL
Allows the user to set the bank(s) with the location(s) to be transferred. With ALL, all the
banks will be transferred together.
Group parameter. Range: CMP, DST, EQ, AMP, MOD, SP1, SP2, DLY, REV, ALL
Allows the user to select the Group(s) to be transferred within the selected memory location.
Naturally, ALL includes all the groups.
As the message on the LCD indicates, once the parameters required have been selected and
the correct Midi connections have been made, the user simply starts the operation by pressing
ENTER/WRITE.
•
N.B.:
the data Dump is also carried out if the Group selected is disactivated or in Bypass
status.
The procedure for reloading the saved patches is very simple: just send the data to the GM
400 through the Midi In socket when the display is showing the PLAY MODE: the multieffects
unit will reply with a message which shows that data reception is in progress.
7.4 TUNER
In practice, this utility is a digital tuner which can be used to check the tuning of an input
signal.
Mode parameter.
Selects the tuning mode. There are 12 operating options to cover the most widely varying
uses.
CHROMATIC: suitable for any use.
Содержание GM-400
Страница 1: ...VISCOUNT JOINT VENTURE Oberheim GM 400 DIGITAL SIGNAL PROCESSOR OPERATING MANUAL...
Страница 70: ......
Страница 72: ......
Страница 74: ......