manualshive.com logo in svg

NXP Semiconductors SAFE ASSURE FRDMGD3100HBIEVM, Руководство пользователя, Страница: 3 / 35

Поделиться
Скачать
NXP Semiconductors SAFE ASSURE FRDMGD3100HBIEVM Скачать руководство пользователя страница 3

NXP Semiconductors

UM11134

FRDMGD3100HBIEVM half-bridge evaluation board

UM11134

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2020. All rights reserved.

User guide

Rev. 3 — 10 February 2020

3 / 35

3 Getting started

The NXP analog product development boards provide an easy-to-use platform for

evaluating NXP products. These development boards support a range of analog, mixed-

signal, and power solutions. These boards incorporate monolithic integrated circuits and

system-in-package devices that use proven high-volume technology. NXP products offer

longer battery life, a smaller form factor, reduced component counts, lower cost, and

improved performance in powering state-of-the-art systems.
The tool summary page for FRDMGD3100HBIEVM is at 

http://www.nxp.com/

FRDMGD3100HBIEVM

. The overview tab on this page provides an overview of the

device, a list of device features, a description of the kit contents, links to supported

devices and a 

Get Started

 section.

The 

Get Started

 section provides information applicable to using the

FRDMGD3100HBIEVM.
1. Go to 

http://www.nxp.com/FRDMGD3100HBIEVM

.

2. On the 

Overview

 tab, locate the 

Jump To

 navigation feature on the left side of the

window.

3. Select the 

Get Started

 link.

4. Review each entry in the 

Get Started

 section.

5. Download an entry by clicking on the linked title.
After reviewing the 

Overview

 tab, visit the other related tabs for additional information:

• Documentation

: Download current documentation.

• Software & Tools

: Download current hardware and software tools.

• Buy/Parametrics

: Purchase the product and view the product parametrics.

After downloading files, review each file, including the user guide, which includes setup

instructions. If applicable, the bill of materials (BOM) and supporting schematics are also

available for download in the 

Get Started

 section of the 

Overview

 tab.

3.1 Kit contents/packing list

The FRDMGD3100HBIEVM kit contents include:

•

Half-bridge gate driver board (FRDMGD3100HBIEVB)

•

Logic translator board (KITGD3100TREVB) attached to FRDM-KL25Z

•

USB cable, type A male/type mini B male, 3 ft

•

Quick start guide

3.2 Required equipment

To use this kit, you will also need:

•

Infineon IGBT FS820R08A6P2B Hybrid PACK Drive

•

DC link capacitor compatible with IGBT

–

SBE Power Ring 700A186 500 µF, 500 V DC

•

50 mil jumpers for configuration

•

30 µH to 50 µH, high current air core inductor for double pulse testing

•

HV power supply with protection shield and hearing protection

•

25 V, 1.0 A DC power supply

•

Pulse generator

Содержание SAFE ASSURE FRDMGD3100HBIEVM




































Отзывы:

Нет отзывов