manualshive.com logo in svg

NXP Semiconductors SAFE ASSURE FRDMGD3100HBIEVM, Руководство пользователя, Страница: 28 / 35

Поделиться
Скачать
NXP Semiconductors SAFE ASSURE FRDMGD3100HBIEVM Скачать руководство пользователя страница 28

NXP Semiconductors

UM11134

FRDMGD3100HBIEVM half-bridge evaluation board

UM11134

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2020. All rights reserved.

User guide

Rev. 3 — 10 February 2020

28 / 35

6.3.6 Single command

The Single command view contains a log of recent commands, displayed in hexadecimal

format. Single SPI commands can be saved and recalled by name. Commands defined

here are available for scripting in the Batch commands page. SPI words sent and

received (initiated from any tab) are logged here in hexadecimal and can be saved and

exported in a text file. Daisy-chain length command structure (n*24 bit length, where n >

1) are not supported by this view.

Figure 20. Single command view

6.3.7 Batch command

The Batch commands view allows creation of scripts containing commands defined by

the Single command page. Batches can be named, saved, and recalled. This is useful for

quickly initializing the device after powering up.
The batch commands sent can be logged and saved in a text file. The SPI words sent/

received can be viewed in hexadecimal and exported back in the Single commands view.

Daisy-chain length command structure (n*24 bit length, where n > 1) are not supported

by this view.

Содержание SAFE ASSURE FRDMGD3100HBIEVM




































Отзывы:

Нет отзывов