MPC8349E-mITX-GP Reference Design Platform User’s Guide, Rev. 0
Freescale Semiconductor
29
Preliminary—Subject to Change Without Notice
Getting Started
1.8
Mechanical Data
Figure 21
shows the MPC8349E-mITX-GP dimensions (in mils). The board dimensions are
170 mm
×
170 mm (6692 mils
×
6692 mils) for integration in a mini-ITX chassis with a small footprint.
The locations of the mounting holes are shown in
Figure 21
.
Figure 21. Dimensions of the MPC8349E-mITX-GP Board
2
Getting Started
This section describes how to boot up the MPC8349E-mITX-GP board. The on-board Flash memory has
been preloaded with a Flash image from the factory. Before powering up the board, set the on-board
jumpers according to the settings listed in
Section 2.1, “Board Jumper Settings,”
install the DDR memory
module according to the instructions in
Section 2.2, “Install DIMM Module,”
and then make all the
external connections as described in
Section 2.3, “External Connections.”
CAUTION
Avoid touching areas of integrated circuitry and connectors; static discharge
can damage circuits.