2. In the
Target Connection Configurator window that opens, click the USB button if not already selected.
Step 3:
1. The CodeWarrior tools communicate with the TAP run controllers through a CodeWarrior Connection.
2. The CodeWarrior connection server console can be used to cross-check if the CodeWarrior TAP is connected during a
task like “inspect” in the previous test is running.
3. Open CCS from the
Show hidden icons popup as shown in the snapshot below or go to “..\Freescale
\CW4NET_v2017.03\Common\CCS\bin” and open ccs.
NXP Semiconductors
CodeWarrior CCS
MPC-LS Vehicle Network Processing Evaluation Board User Manual, Rev. 0, Feb 2019
User's Guide
97 / 107