manualshive.com logo in svg

NXP Semiconductors MPC-LS series, Руководство пользователя, Страница: 84 / 107

Поделиться
Скачать
NXP Semiconductors MPC-LS series Скачать руководство пользователя страница 84

 

If you have flashed binaries of Getting Started package 2 on the MPC5748G side, set the speed of the Ethernet
port to 100 Mbps Full Duplex in the Ethernet adapters. To do so, go to 

Network and Sharing Center -> Change

adapter settings. Right-click on Local Area Connection -> Properties -> Networking Tab -> Configure ->
Advanced Tab -> Speed & Duplex -> Set value to 100 Mbps Full Duplex.

  NOTE  

The default software flashed to the boards is Getting Started Package 2.

For Getting Started package 1, the user needs to set this value to Auto Negotiation.

The user may skip the below section of serial flashing and jump to section 

9.2.1.6 Flash images from u-boot console via ethernet

port

 for flashing via Ethernet.

1. Write the command “sf probe” and press enter. NOR memory must be detected.

2. On the U-Boot shell, write “loady” and press enter.

3. Now go to 

File -> Transfer -> YMODEM -> send.

NXP Semiconductors

How to flash the board or perform board recovery

MPC-LS Vehicle Network Processing Evaluation Board User Manual, Rev. 0, Feb 2019

User's Guide

84 / 107

Содержание MPC-LS series












































































































Отзывы:

Нет отзывов