24. Provide your location and your login credentials.
25. Ubuntu will be installed.
26. If you get the message “Remove Media”, then just hit enter.
All the further instructions and steps mentioned for Linux are common and applicable to both Linux Ubuntu machine
as well as Ubuntu on VirtualBox.
NOTE
8.1.3 Linux LSDK17.12 setup and build
Open Source Linux Software Development Kit (LSDK).
8.1.3.1 Source path
1. The LSDK source and binaries can be found at “
https://lsdk.github.io/
”. For details on downloading them, follow the below
steps.
2. In total 5 images will be flashed on LS1043A. Out of which the binaries of ‘ppa.itb’ and ‘fsl_fman’ will be readily available
on git hub and the source code for ‘rcw’, ‘U-Boot’ and ‘Linux’ will be downloaded/cloned from git hub and built locally.
Here is a brief description of all these images used:
a. RCW: Reset configuration word.
b. U-Boot: Universal Boot Loader.
c. PPA: Primary Protected Application.
d. Fman: Frame manager hardware accelerator.
e. Linux: Linux image.
3. Create
DCM_git
directory at
/home/<user>
to store the LSDK17.12 source code.
4. For rcw source, go inside the DCM_git directory and pass the below commands. Copy and paste may not work by
default in the virtual box. If this is the case, follow section
Enable copy and paste from/to VirtualBox
of Annexure.
>> git clone
https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
>> cd rcw
>> git checkout -b integration origin/github.com.qoriq-os/integration
The source will be automatically stored to a directory
rcw
.
NXP Semiconductors
How to build the software for LS1043A and MPC5748G
MPC-LS Vehicle Network Processing Evaluation Board User Manual, Rev. 0, Feb 2019
User's Guide
20 / 107