manualshive.com logo in svg

NXP Semiconductors MPC-LS series, Руководство пользователя, Страница: 100 / 107

Поделиться
Скачать
NXP Semiconductors MPC-LS series Скачать руководство пользователя страница 100

i. Restart your laptop, press and hold "F2" on the computer keyboard when the Dell logo appears on the

screen. The computer will enter the system setup program to display information stored in BIOS.

ii. Drop down to Virtualization support.

iii. Enable Virtualization (if not already enabled) as shown below. If already enabled, save and reboot the

machine.

b. Once Intel Virtualization is enabled, enable the VT for Direct I/O(below Virtualization) as well if your BIOS has this

option.

c. Save and reboot the machine.

2. Disable the group policy setting that is used to enable Credential Guard.

a. Click 

Start > Run, type gpedit.msc, and click Ok. The Local group Policy Editor opens.

b. Go to 

Local Computer Policy > Computer Configuration > Administrative Templates > System > Device

Guard > Turn on Virtualization Based Security.

c. Select 

Disabled.

3. Disable Hyper-V in Windows 10. To do so follow the below steps:

a.

Control Panel -> Programs and Features -> Turn Windows Features on or off. Uncheck the Hyper-V
checkbox and click on 

OK.

NXP Semiconductors

Running 64-bit guest on VirtualBox

MPC-LS Vehicle Network Processing Evaluation Board User Manual, Rev. 0, Feb 2019

User's Guide

100 / 107

Содержание MPC-LS series












































































































Отзывы:

Нет отзывов