b. Run below commands (Ensure B is an unused drive, else change to another drive):
i. mountvol B: /s
ii. copy %WINDIR%\System32\SecConfig.efi B:\EFI\Microsoft\Boot\SecConfig.efi /Y
iii. bcdedit /create {0cb3b571-2f2e-4343-a879-d86a476d7215} /d "DebugTool" /application osloader
iv. bcdedit /set {0cb3b571-2f2e-4343-a879-d86a476d7215} path "\EFI\Microsoft\Boot\SecConfig.efi"
v. bcdedit /set {bootmgr} bootsequence {0cb3b571-2f2e-4343-a879-d86a476d7215}
vi. bcdedit /set {0cb3b571-2f2e-4343-a879-d86a476d7215} loadoptions DISABLE-LSA-ISO,DISABLE-VBS
vii. bcdedit /set {0cb3b571-2f2e-4343-a879-d86a476d7215} device partition=B:
viii.mountvol B: /d
5. Disable Device Guard.
a. Restart your laptop.
b. Accept the prompt on the boot screen to disable Device Guard or Credential Guard.
6. Install VirtualBox if not already installed yet and then continue with the steps in section
VirtualBox on Windows Host
.
C Enable copy and paste from/to VirtualBox
Check Ubuntu settings:
1. Select Devices – Shared Clipboard- Bidirectional
NXP Semiconductors
Enable copy and paste from/to VirtualBox
MPC-LS Vehicle Network Processing Evaluation Board User Manual, Rev. 0, Feb 2019
User's Guide
102 / 107