29. Save the configurations using Ctrl+s and click the red cross on the top right side to close the configurations for EcuM
module.
30. Double-click the OS module highlighted below to update it.
31. Select the “udp_tp_dev_demo_task” under OsTask:s.
32. Do the following general settings for the OsTask:
a. Arc Os Task Stack Size : 4096
b. Os Task Accessing Application : Tick the check box, click the “select reference value” button and select
OsApplication.
c. Set OsTaskActivation to 1
d. Set OsTaskPriority to 2
e. Make sure the OsTaskPriority for all the tasks are as below:
i. MainLWIPTask – 4
ii. OsBswServiceTask – 6
iii. OsRteTask – 3
iv. OsStartupTask – 5
v. Tcpip_task – 5
vi. Udp_mcapi_demo_task - 2
NXP Semiconductors
How to build the software for LS1043A and MPC5748G
MPC-LS Vehicle Network Processing Evaluation Board User Manual, Rev. 0, Feb 2019
User's Guide
56 / 107