NXP Semiconductors MPC-LS series, Руководство пользователя, Страница: 21 / 107

Note: Use the command
sudo apt install git
if git is not already installed and
git config --global user.email
“you@email.com””
to set your account’s default identity.
>>cd ..
5. For the U-Boot and linux images, follow the below steps in DCM_git directory:
U-Boot:
“git clone https://github.com/qoriq-open-source/u-boot ”
Linux:
“git clone https://github.com/qoriq-open-source/linux ”
DCM_git directory will have the below three directories:
• rcw
• u-boot
• linux
6. Change the directory to u-boot by using
cd
and enter the command
git checkout -b LSDK-17.12 LSDK-17.12
to
make sure the tag used for LSDK is 17.12.
7. For
fsl_fman
and
ppa.itb
, binaries are provided on the webpage.
8.
Fsl_fman: Go to
https://github.com/NXP/qoriq-fm-ucode
In the directory, download
fsl_fman_ucode_ls1043_r1.1_106_4_18.bin
. This binary will be later used in the "how to flash
section.
Ppa.itb: Go to
https://github.com/NXP/qoriq-ppa-binary/blob/integration/soc-ls1043/ppa.itb
Select soc-ls1043.
Download the
.itb
file.
NXP Semiconductors
How to build the software for LS1043A and MPC5748G
MPC-LS Vehicle Network Processing Evaluation Board User Manual, Rev. 0, Feb 2019
User's Guide
21 / 107