manualshive.com logo in svg

NXP Semiconductors MC9S12VRP64, Руководство владельца

Владельцы NXP Semiconductors MC9S12VRP64 могут скачать бесплатно Руководство по эксплуатации на веб-сайте manualshive.com. Этот мануал обеспечивает детальное описание продукта, а также инструкции по использованию. Будьте уверены, что ваше устройство всегда работает на максимальной производительности, загрузив этот инструктаж прямо сейчас.

Поделиться
Скачать
background image

Background Debug Module (S12SBDMV1) 

MC9S12VRP Family Reference Manual Rev. 1.3

190

NXP Semiconductors

If an interrupt is pending when a TRACE1 command is issued, the interrupt stacking operation occurs but 
no user instruction is executed. Once back in standard BDM firmware execution, the program counter 
points to the first instruction in the interrupt service routine.

Be aware when tracing through the user code that the execution of the user code is done step by step but 
all peripherals are free running. Hence possible timing relations between CPU code execution and 
occurrence of events of other peripherals no longer exist.

Do not trace the CPU instruction BGND used for soft breakpoints. Tracing over the BGND instruction will 
result in a return address pointing to BDM firmware address space.

When tracing through user code which contains stop or wait instructions the following will happen when 
the stop or wait instruction is traced: 

The CPU enters stop or wait mode and the TRACE1 command can not be finished before leaving 
the low power mode. This is the case because BDM active mode can not be entered after CPU 
executed the stop instruction. However all BDM hardware commands except the BACKGROUND 
command are operational after tracing a stop or wait instruction and still being in stop or wait 
mode. If system stop mode is entered (all bus masters are in stop mode) no BDM command is 
operational. 
As soon as stop or wait mode is exited the CPU enters BDM active mode and the saved PC value 
points to the entry of the corresponding interrupt service routine. 
In case the handshake feature is enabled the corresponding ACK pulse of the TRACE1 command 
will be discarded when tracing a stop or wait instruction. Hence there is no ACK pulse when BDM 
active mode is entered as part of the TRACE1 command after CPU exited from stop or wait mode. 
All valid commands sent during CPU being in stop or wait mode or after CPU exited from stop or 
wait mode will have an ACK pulse. The handshake feature becomes disabled only when system 
stop mode has been reached. Hence after a system stop mode the handshake feature must be 
enabled again by sending the ACK_ENABLE command. 

5.4.11

Serial Communication Time Out

The host initiates a host-to-target serial transmission by generating a falling edge on the BKGD pin. If 
BKGD is kept low for more than 128 target clock cycles, the target understands that a SYNC command 
was issued. In this case, the target will keep waiting for a rising edge on BKGD in order to answer the 
SYNC request pulse. If the rising edge is not detected, the target will keep waiting forever without any 
time-out limit.

Consider now the case where the host returns BKGD to logic one before 128 cycles. This is interpreted as 
a valid bit transmission, and not as a SYNC request. The target will keep waiting for another falling edge 
marking the start of a new bit. If, however, a new falling edge is not detected by the target within 512 clock 
cycles since the last falling edge, a time-out occurs and the current command is discarded without affecting 
memory or the operating mode of the MCU. This is referred to as a soft-reset. 

If a read command is issued but the data is not retrieved within 512 serial clock cycles, a soft-reset will 
occur causing the command to be disregarded. The data is not available for retrieval after the time-out has 
occurred. This is the expected behavior if the handshake protocol is not enabled. In order to allow the data 
to be retrieved even with a large clock frequency mismatch (between BDM and CPU) when the hardware 

Содержание MC9S12VRP64












































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MC9S12VRP64

GE PACSystems* RX3i Application Manual preview
PACSystems* RX3i
Бренд: GE Страницы: 39
GE PACSystems* RX3i Secure Deployment Manual preview
PACSystems* RX3i
Бренд: GE Страницы: 35
GE PACSystems* RX3i Important Product Information preview
PACSystems* RX3i
Бренд: GE Страницы: 3
GE PACSystems* RX3i User Manual preview
PACSystems* RX3i
Бренд: GE Страницы: 169
CAME Z Series Technical Documentation Manual preview
Z Series
Бренд: CAME Страницы: 16
Ultrak KEGS5000 User Manual preview
KEGS5000
Бренд: Ultrak Страницы: 41
Zander Aachen ZX Series Quick Start Manual preview
ZX Series
Бренд: Zander Aachen Страницы: 10
Danfoss VLT 2800 Instruction Manual preview
VLT 2800
Бренд: Danfoss Страницы: 7
Velleman KA01 Manual preview
KA01
Бренд: Velleman Страницы: 12
Audioaccess PX-700 Manual preview
PX-700
Бренд: Audioaccess Страницы: 2
Vimar by-me Eikon 20526 Quick Start Manual preview
by-me Eikon 20526
Бренд: Vimar Страницы: 6
Therma-Stor 4028407 Installation Instructions Manual preview
4028407
Бренд: Therma-Stor Страницы: 20
Z-Wave HKZW-STICK Operating Manual preview
HKZW-STICK
Бренд: Z-Wave Страницы: 3
TECH EU-391 ZPID User Manual preview
EU-391 ZPID
Бренд: TECH Страницы: 20
Trikdis GV17 Short Installation Manual preview
GV17
Бренд: Trikdis Страницы: 7
ICP DAS USA WISE-5801 Application Example preview
WISE-5801
Бренд: ICP DAS USA Страницы: 20
iNels JA3-018M Quick Start Manual preview
JA3-018M
Бренд: iNels Страницы: 2
SIATA PS0335 XP0/05 Service Manual preview
PS0335 XP0/05
Бренд: SIATA Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды