Over The Air Programmer Demonstration
MC1322x SMAC Demonstration Application User’s Guide, Rev. 1.3
Freescale Semiconductor
10-9
10.5
Transmitting the New Image to the OTAP-enabled Board
Users must have an OTAP Programmer board running with a valid
.srec
file image and a device with an
OTAP-enabled application running. This example uses the Accelerometer Demonstration application.
There are two options for users to FLASH the device over the air:
•
Serial Interface (
Section 10.5.1, “Using the Serial Interface”
)
•
LCD Interface (
Section 10.5.2, “Using The LCD Interface”
)
10.5.1
Using the Serial Interface
1. Press the Reset button on the OTAP Programmer Board.
2. Press SW2 on the OTAP Programmer Board. The serial terminal displays text as shown in
Figure 10-12
.
Figure 10-12. OTAP Programmer Start Message
3. Press "P" on the keyboard to search for devices to program. The serial terminal appears as shown
in
Figure 10-13
.
Figure 10-13. OTAP Programmer Found a Device