Connectivity Test
MC1322x SMAC Demonstration Application User’s Guide, Rev. 1.3
Freescale Semiconductor
3-5
2. Press the appropriate key to perform the associated task.
Users can set the desired channel or power through this menu. RX and TX mode must be operating on the
same channel.
When the “SELECT TEST MODE” (Option 3) is selected, users are routed to a menu to select the
operating mode in which the board is going to work (RX or TX) , this menu option is displayed as shown
in
Figure 3-6
.
Figure 3-6. TX / RX Menu
After setting up the mode in which the board is going to work, the menu appears as shown in
Figure 3-7
.
The Connectivity test options are described in detail in
Section 3.4, “Connectivity Test Applications”
.
Figure 3-7. Test Mode Menu (Receive on Left, Transmit on Right)
3.4
Connectivity Test Applications
The Connectivity Test application combines the Test Mode application, Packet Error Rate (PER) tests, and
Range Test applications. The following sections describe each of these tests.