Generating an SMAC Application and Port Configuration
MC1322x SMAC Demonstration Application User’s Guide, Rev. 1.3
1-6
Freescale Semiconductor
1.1
Loading Applications Into a Board Using the JTAG J-Link ARM
Debugger
After exporting from BeeKit, the projects are generated as a
.eww
file. Perform the following tasks to load
the application to a board, using the IAR Embedded Workbench IDE. This example uses the repeater
application.
1. As shown in
Figure 1-7
, open the
My Solution.eww
file.
Figure 1-7. Opening a project
2. Make the project by clicking the Make button (
Figure 1-8
) which is located at the top of the IAR
Embedded Workbench main Window as shown in
Figure 1-9
.
Figure 1-8. Make Button
Figure 1-9. IAR Embedded Workbench Main Window
3. Connect the J-Link to the target board.
4. Click the Debug button
Figure 1-10
which is located at the top of the IAR Embedded Workbench
main window as shown in
Figure 1-9
.
Figure 1-10. Debug