Generic Application Demonstration
MC1322x SMAC Demonstration Application User’s Guide, Rev. 1.3
6-2
Freescale Semiconductor
2. Select “Release” in the Workspace window.
3. Click on Project -> Rebuild All.
The folders Release, Debug, and the settings are now created in the project structure as shown in
Figure 6-2
.
Figure 6-2. Release, Debug, and Settings
The
WirelessUART.bin
file is placed at the following directory location:
[Project Directory]\Release\Exe\
4. Load the
Generic Application
file to a board using the JTAG interface. Connect the JTAG
interface to the board, then click the Debug button at the IAR Embedded Workbench IDE.
5. Use a PC terminal communications program, such as Hyper Terminal, and set the correct baud rate,
data bits, parity, COM port, and flow control.
Figure 6-3
shows the default MC1322x SMAC
RS232 settings.
Figure 6-3. Default SMAC RS-232 Settings