Low Power Bell Demonstration
MC1322x SMAC Demonstration Application User’s Guide, Rev. 1.3
Freescale Semiconductor
5-3
The
Low Power Bell Tx.bin
file is located at the following directory location:
[Project Directory]\Release\Exe\
5. Use the JTAG interface to load the
Low Power Bell TX
application on the board being used as the
Low Power Bell TX. Connect the JTAG interface to the board, then click the Debug button at the
IAR Embedded Workbench IDE.
6. Choose the “Low Power Bell RX” tab.
7. Repeat Steps 3 and 4.
The
Low Power Bell RX.bin
file is located at the following directory location:
[Project Directory]\Release\Exe\
8. Use the JTAG interface to load the
Low Power Bell RX
application on the board being used as the
Low Power Bell RX. Click the IAR Debug button to download the application to the board.
9. Reset both boards.
Pressing SW1 on the Low Power TX board sounds the buzzer on the Low Power Bell RX board.