manualshive.com logo in svg

NXP Semiconductors M5253EVBE, Руководство пользователя, Страница: 36 / 56

Поделиться
Скачать
NXP Semiconductors M5253EVBE Скачать руководство пользователя страница 36

M5253EVBE Users Manual, Rev. 1

2-18

Freescale Semiconductor

 

Examples:

To set the baud rate of the board to be 19200, the command is:

set baud 19200

NOTE

See the SHOW command for a display containing the correct formatting of 
these options.

2.4.25

SHOW (Show Configurations)

Usage: SHOW <option>

The SHOW command displays the settings of the user-configurable options within dBUG. When no option 
is provided, SHOW displays all options and values.

Examples:

To display all options and settings, the command is:

show

To display the current baud rate of the board, the command is:

show baud

Here is an example of the output from a show command:

dBUG> show

        base: 16

        baud: 19200

      server: 192.0.0.1

      client: 192.0.0.2

     gateway: 0.0.0.0

     netmask: 255.255.255.0

    filename: test.srec

    filetype: S-Record

mac: 00:CF:52:49:C3:01

2.4.26

STEP (Step Over)

Usage: STEP

The STEP command can be used to “step over” a subroutine call, rather than tracing every instruction in 
the subroutine. The ST command sets a temporary breakpoint one instruction beyond the current program 
counter and then executes the target code.

The STEP command can be used to “step over” BSR and JSR instructions.

The STEP command will work for other instructions as well, but note that if the STEP command is used 
with an instruction that will not return, i.e. BRA, then the temporary breakpoint may never be encountered 
and dBUG may never regain control.

Содержание M5253EVBE

























































Отзывы:

Нет отзывов