manualshive.com logo in svg

NXP Semiconductors M5253EVBE, Руководство пользователя, Страница: 34 / 56

Поделиться
Скачать
NXP Semiconductors M5253EVBE Скачать руководство пользователя страница 34

M5253EVBE Users Manual, Rev. 1

2-16

Freescale Semiconductor

 

Internal SRAM    0x20000000   0x20000FFF   32-bit

External SRAM    0x30000000   0x3007FFFF   32-bit

Flash 

 

0xFFE00000   0xFFFFFFFF   16-bit

Chip Selects

----------------

CS0  Flash

CS1  Ethernet controller

CS2  not in use

CS3  not in use

2.4.21

RD (Register Display)

Usage: RD <reg>

The RD command displays the register set of the target. If no argument for reg is provided, then all 
registers are displayed. Otherwise, the value for reg is displayed.

dBUG preserves the registers by storing a copy of the register set in a buffer. The RD command displays 
register values from the register buffer. 

Examples:

To display all the registers and their values, the command is:

rd

To display only the program counter:

rd pc

Here is an example of the output from this command:

PC: 00000000 SR: 2000 [t.Sm.000...xnzvc]

An: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 01000000

Dn: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

2.4.22

RM (Register Modify)

Usage: RM reg data

The RM command modifies the contents of the register reg to data. The value for reg is the name of the 
register, and the value for data may be a symbol name, or it is converted according to the user-defined 
radix, normally hexadecimal.

dBUG preserves the registers by storing a copy of the register set in a buffer. The RM command updates 
the copy of the register in the buffer. The actual value will not be written to the register until target code is 
executed.

Examples:

To change register D0 on MC68000 and ColdFire to contain the value 0x1234, the command is:

rm D0 1234

Содержание M5253EVBE

























































Отзывы:

Нет отзывов