manualshive.com logo in svg

NXP Semiconductors M5253EVBE, Руководство пользователя, Страница: 2 / 56

Поделиться
Скачать
NXP Semiconductors M5253EVBE Скачать руководство пользователя страница 2

 

 

How to Reach Us:

Home Page:

www.freescale.com

E-mail:

[email protected]

USA/Europe or Locations Not Listed:

Freescale Semiconductor
Technical Information Center, CH370
1300 N. Alma School Road
Chandler, Arizona 85224
+1-800-521-6274 or +1-480-768-2130
[email protected]

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
[email protected]

Japan:

Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku,
Tokyo 153-0064, Japan
0120 191014 or +81 3 5437 9125
[email protected]

Asia/Pacific:

Freescale Semiconductor Hong Kong Ltd.
Technical Information Center
2 Dai King Street
Tai Po Industrial Estate
Tai Po, N.T., Hong Kong
+800 2666 8080
[email protected]

For Literature Requests Only

:

Freescale Semiconductor Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1-800-521-6274 or 303-675-2140
Fax: 303-675-2150
[email protected]

Information in this document is provided solely to enable system and software implementers to use 
Freescale Semiconductor products. There are no express or implied copyright licenses granted 
hereunder to design or fabricate any integrated circuits or integrated circuits based on the information 
in this document.

Freescale Semiconductor reserves the right to make changes without further notice to any products 
herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the 
suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any 
liability arising out of the application or use of any product or circuit, and specifically disclaims any 
and all liability, including without limitation consequential or incidental damages. “Typical” parameters 
that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary 
in different applications and actual performance may vary over time. All operating parameters, 
including “Typicals”, must be validated for each customer application by customer’s technical experts. 
Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. 
Freescale Semiconductor products are not designed, intended, or authorized for use as components 
in systems intended for surgical implant into the body, or other applications intended to support or 
sustain life, or for any other application in which the failure of the Freescale Semiconductor product 
could create a situation where personal injury or death may occur. Should Buyer purchase or use 
Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall 
indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and 
distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney 
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such 
unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was 
negligent regarding the design or manufacture of the part.

Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other 
product or service names are the property of their respective owners. 

© Freescale Semiconductor, Inc. 2007. All rights reserved.

Содержание M5253EVBE

























































Отзывы:

Нет отзывов