manualshive.com logo in svg

NXP Semiconductors M5253EVBE, Руководство пользователя, Страница: 35 / 56

Поделиться
Скачать
NXP Semiconductors M5253EVBE Скачать руководство пользователя страница 35

M5253EVBE Users Manual, Rev. 1

Freescale Semiconductor

2-17

 

2.4.23

RESET (Reset the Board and dBUG)

Usage: RESET

The RESET command resets the board and dBUG to their initial power-on states.

The RESET command executes the same sequence of code that occurs at power-on. If the RESET 
command fails to reset the board adequately, cycle the power or press the reset button.

Examples:

To reset the board and clear the dBUG data structures, the command is:

reset

2.4.24

SET (Set Configurations)

Usage: SET <option value>

The SET command allows the setting of user-configurable options within dBUG. With no arguments, SET 
displays the options and values available. The SHOW command displays the settings in the appropriate 
format. The standard set of options is listed below.

•

baud—This is the baud rate for the first serial port on the board. All communications between 
dBUG and the user occur using either 9600 or 19200 bps, eight data bits, no parity, and one stop 
bit, 8N1, with no flow control.

•

base—This is the default radix for use in converting a number from its ASCII text representation 
to the internal quantity used by dBUG. The default is hexadecimal (base 16), and other choices are 
binary (base 2), octal (base 8), and decimal (base 10).

•

client—This is the network Internet Protocol (IP) address of the board. For network 
communications, the client IP is required to be set to a unique value, usually assigned by your local 
network administrator.

•

server—This is the network IP address of the machine which contains files accessible via TFTP. 
Your local network administrator will have this information and can assist in properly configuring 
a TFTP server if one does not exist.

•

gateway—This is the network IP address of the gateway for your local subnetwork. If the client IP 
address and server IP address are not on the same subnetwork, then this option must be properly 
set. Your local network administrator will have this information.

•

netmask—This is the network address mask to determine if use of a gateway is required. This field 
must be properly set. Your local network administrator will have this information.

•

filename—This is the default filename to be used for network download if no name is provided to 
the DN command.

•

filetype—This is the default file type to be used for network download if no type is provided to the 
DN command. Valid values are: “srecord”, “coff”, and “elf”.

•

mac—This is the ethernet Media Access Control (MAC) address (a.k.a hardware address) for the 
evaluation board. This should be set to a unique value, and the most significant nibble should 
always be even.

Содержание M5253EVBE

























































Отзывы:

Нет отзывов