Nuova Simonelli BOZZE 6 Скачать руководство пользователя страница 46

Страница: 46 / 122

• COFFEE BOILER TEMPERATURE: the

current temperature of the coffee boiler
is visualized.

• UNIT TEMPERATURE: the current tem-

perature of the coffee unit is visualized

• COFFEE GROUND No: the coffee

ground number within the drawer is
visualized

• MAIN. SOFTENER FILTER: the number

of litres of water utilized (with the “U15”
key inserted and pressing the RESET
button for 5 seconds straight the number
of litres and the anti-scaling filter alarm
are reset. The display will read “0”)

• MAINTENANCE CYCLES: the number

of unit cycles left before the maintenan-
ce alarm will be turned on, is visualized
(with the “U15” key inserted and by
pressing the button for 5 seconds strai-
ght the number of cycles and the main-
tenance alarm programmed during
installation procedures can be reset)

At the end of the visualization you will return
to the “SYSTEM DATA READ” menu.

DOSE PROGRAMMING

By means of the

▼

and

▲

buttons go to the

DOSE PROGRAMMING option, then press
the ENTER button to confirm and proceed
to selecting the buttons to program.

Button selection

The

buttons , , , ,

(version XS only),

(version XS

only), (version

only), (ver-

sion XS only),

(version XS only), are

available and by pressing one of them the
desired dose of water can be requested.
The RESET button takes you back to the
previous menu.

Supposing you want to program the but-

ton .

Water

The water dose is programmed in cc.
The buttons

▼

and

▲

allow you to alter

the dose: 1 ÷4000 cc, step 1 cc.
The ENTER button confirms the value and
allows you to proceed to the following
paragraph.
The RESET button allows you to return to
the previous menu. leaving the value of
the parameter as it was before the altera-
tion.
By pressing the button activated (in the

example, button

), a coffee cycle

with parameters associated with the dose
is initiated with the purpose of carrying out
the programming for the simulation of the
dose of water. The infusion will continue

until the STOP or

button is pressed,

initiating the final phase of the coffee
cycle. At the end of the cycle, the display
indicates the number of cc’s programmed,
which can however be modified manually
with the

▼

and

▲

buttons.

Extra Water

The extra water dose is programmed
together with the coffee dose.
Buttons

▼

and

▲

allow you to alter the

time for the addition of extra water:

0.0÷20.0 sec, step 0.1 sec.; setting 0.0 the
extra water is disabled.
The ENTER button confirms the value and
you can proceed to the following paragraph.
The RESET button takes you back to the
previous menu: SELECTION OF BUTTON
leaving the value of the parameter as it
was before alteration.

Grinding time

The grinding time for the right and left
grinders can be programmed.
Buttons

▼

and

▲

allow you to alter the

grinding time: 0.1÷30.0 sec., step 0.1 sec.
The ENTER button confirms the value and
you can proceed to the following para-
graph. In case you are at the last parame-
ter of the dose, the machine returns to the
previous menu: BUTTON SELECTION.
The RESET button takes you back to the
previous menu: BUTTON SELECTION
leaving the value of the parameter as it
was before the alteration.

Dose parameters

In the following table we list the parame-
ters requested in programming doses for
each type of beverage.

COFFEE SELECTIONS

Parameter

Range

Step

water dose

1÷4000 cc

1 cc

extra water dose

0.0÷20.0 sec.

0.1 sec.