Nuova Simonelli BOZZE 6, Руководство пользователя

Страница: 41 / 122

39
USE AND PROGRAMMING
ENGLISH
Before starting to use the appliance, the
operator must be sure to have read and
understood the safety instructions contai-
ned in this booklet.
SWITCHING ON: By pressing the
key an auto diagnosis cycle will be started
up at the end of which (when the machine
is cold this cycle will last up to 20/25 minu-
tes), the display will read MACHINE
READY.
In case the display should read COFFEE
BOILER FILLING, a manual coffee boiler
filling cycle must be activated by pressing
button . The words COFFEE BOI-
LER FILLING CYCLE will appear and the
needed water level within the coffee boiler
will be reached.
NOTE.: In case the auto diagnosis
should indicate error or malfunction,
call the assistance centre; the operator
should not intervene.
SWITCHING OFF: By pressing the
button for at least one second the
machine will turn off and the display will
read OFF.
1 Small coffee, 2 small coffees,
1 long coffee, 2 long coffees,
Carafe/Jug, Carafe/Jug,
1 Cappuccino (version XS only)
2 Cappuccino (version XS only)
1 Caffè Latte (version XS only)
2 Caffè Latte (version XS only)
1 hot milk (version XS only)
2 hot milk (version XS only)
DECA: Decaffeinated coffee
- The display will read: OPEN DECA
DOOR, then open the small door on the
cup holder board between the two cof-
fee container.
- On opening the small door the message
POUR COFFEE POWDER AND
CLOSE DECA will be displayed; at this
point, pour in the dose of decaffeinated
coffee powder and close the door.
- At this point the message SELECT A
DECA DOSE will appear, select one of
the two buttons
Continuous delivery: this func-
tion enables automatic delivery of the
amount of coffees set and allows you to
vary the programming (minimum 2, maxi-
mum 99):
- Press the CONTINUOUS DELIVERY
button; the number of coffees to
be delivered will be displayed and can be
changed by pressing buttons
▲
and
▼
.
(NOTE: if after changing the number of
deliveries desired the ENTER button is
pressed, the new desired amount of cof-
fee deliveries will be memorized)
- Buttons and allow you to
select the grinder to use for the conti-
nuous doses; the associated led will be
turned on.
- At this point press one of the flashing
buttons:
(NOTE: If you want to stop the conti-
nuous delivery function re-press the
button and the delivery in pro-
gress will be arrested. If, on the other
hand, the STOP button is pressed, the
delivery in progress will be arrested and
the continuous cycle will be stopped.)
STOP: This allows you to stop the delivery
of coffee, cappuccino, caffè latte and milk
ahead of time.
HOT WATER: This button
is for the delivery of hot water and, when
pressed again, the function is interrupted.
(NOTE: the STOP button stops the dose
that is being delivered.)
, Regardless of the grinder
chosen during the delivery button configu-
ration phase, these buttons allow you to
select the coffee grinder to utilize during
the various kinds of deliveries. The selec-
tion has to be carried out prior to the deli-
very selection.