Numatics G3 Series EtherNet/IP, Техническое руководство

Страница: 135 / 154

G3 Series EtherNet/IP TM Technical Manual
Page 13-135
TDG3EPTM1-9EN 05/18
Subject to change without notice
www.asco.com/g3
13.2 Manifold and I/O Data Sizing Worksheet
Step
1
: Choose appropriate value and place the corresponding Input and Output values in the boxes labeled, “Valve Byte
Requirements” at the bottom of the page
2
: Choose up to sixteen modules to be included on the discrete I/O side of the manifold and place sum of the
corresponding input bytes and output bytes in the boxes labeled, “Sub-Bus Byte Requirements” at the bottom of
the page.
3
: Total the input bytes and output bytes values from the boxes labeled “Sub-Bus Byte Requirements” and “Valve
Byte Requirements” in the boxes labeled “Total Input and Output Bytes for Manifold. This is the total input and
output byte values required for the configured manifold.
Valve Side
Step Valve Side
Input Bytes
Output Bytes Status
Enabled
Status
Disabled
1 Up to 32 Solenoid Coils 4 0 4
Digital Modules
Step Module No. Description
Input Bytes
Output Bytes Status
Enabled
Status
Disabled
2
240-203/204 16 Inputs - Terminal Strip 3 2 0
240-205/209 16 Inputs - 8 x 12mm 3 2 0
240-206/210 8 Inputs - 8 x 12mm 2 1 0
240-207 16 Outputs - 8 x 12mm 2 0 2
240-208 8 Outputs - 8 x 12mm 1 0 1
240-211 8 Inputs / 8 Outputs - 8 x 12mm 3 1 1
240-241 Sub – Bus Valve Output 4 0 4
240-300 High Current 8 Outputs – 8 x 12mm 1 0 1
Analog Modules
Step Module No. Description
Input Bytes
Output Bytes Status
Enabled
Status
Disabled
2
240-212/214 4 Inputs 10 8 0
240-213/215/307 2 Inputs/ 2 Outputs 6 4 4
Total Input/Output Size Calculation
Step Module Position Model Number Input Bytes Output Bytes
2
1 st
2 nd
3 rd
4 th
5 th
6 th
7 th
8 th
9 th
10 th
11 th
12 th
13 th
14 th
15 th
16 th
Sub-Bus Byte Requirements:
Optional Diagnostic Word: 2 0
1 Valve Byte Requirements:
3 Total Input and Output Bytes for Manifold