Numatics G3 Series EtherNet/IP, Техническое руководство

Страница: 131 / 154

G3 Series EtherNet/IP TM Technical Manual
Page 12-131
TDG3EPTM1-9EN 05/18
Subject to change without notice
www.asco.com/g3
Generic Ethernet Module Parameters
Comm. Format
The “Comm Format” determines the format of the data exchanged with the G3 EtherNet/IP TM node.
Assembly Instance Values
The following Assembly Instance parameters must be used with the G3 EtherNet/IP TM module.
Description Data
Description
Comm Format
Data – DINT
Double Integer – 32 Bit
Data – INT
Integer – 16 Bit
Data – SINT
Single Integer – 8 Bit
Description Assembly Instance Values Size (depends on data format)
Input
100 (Decimal)
Total input value from the physical manifold
configuration. This is a minimum value. Larger
values may be specified for future expansion
purposes.
Output
150 (Decimal)
Total output value from the physical manifold
configuration. This is a minimum value. Larger
values may be specified for future expansion
purposes.
Configuration 1 (Decimal) 0