Numatics G3 Series EtherNet/IP, Техническое руководство, Страница: 26 / 154

G3 Series EtherNet/IP TM Technical Manual
Page 4-26
TDG3EPTM1-9EN 05/18
Subject to change without notice
www.asco.com/g3
4.7 Diagnostics
Communication Module LED Functions
Upon power up, the LEDs indicate the status of the unit. There are three LEDs on the G3 EtherNet node.
These LEDs are described below.
LED Name Color Status Description
MODULE
STATUS
Off OFF No power applied to +24V
NODE/ IN
.
Green
ON Device operational. The module is operating correctly.
FLASHING Standby. The module has not been configured.
Red
ON Major fault. A major internal error has been detected.
FLASHING
Minor fault. A minor recoverable fault has been detected.
Self -Test Mode - An error has occurred in the initialization process.
Green Red FLASHING Self -Test Mode.
NETWORK STATUS
Off OFF
IP address has not been assigned to node or no power applied to
+24V
NODE/ IN
.
Green
ON Connected. The module has established an EtherNet/IP TM connection.
FLASHING
No connection. There are no EtherNet/IP TM connections established to the
module.
Red
ON
Duplicate IP address. The module has detected that its IP address is
already being used elsewhere on the network
FLASHING
EtherNet/IP TM connection has timed out. One or more of the connections
for which this module is the target has timed out.
ACTIVITY/LINK Green
OFF No EtherNet connection is detected
ON The module is connected to an EtherNet TM network
FLASHING The LED flashes each time a packet is received or transmitted.