NTT docomo XPERIA A SO-04E with Series, Инструкция по эксплуатации

Страница: 40 / 284

38
Before Using the Terminal
When using AC Adapter 04 (optional) for
charging, do the following procedures.
For opening/closing microUSB jack cover, see
"To ensure water resistant/dust resistant"
(P.24, P.25).
1
Open the microUSB jack cover and
insert the microUSB plug of the AC
adapter straight into the microUSB
jack of the terminal, with the USB
symbol (B) facing up.
2
Unfold the power plug of the AC
adapter and insert it into an outlet.
･
Notification LED lights on the terminal.
For notification LED for charging, see
"Notification LED" (P.46).
3
When charging is complete,
remove the power plug from the
power outlet.
4
Remove the microUSB plug of the
AC adapter evenly from the
terminal.
5
Close the microUSB jack cover,
firmly press it and make sure that
there are no gaps between the
terminal and cover.
❖
Note
･
If the AC adapter is connected into the microUSB jack
for charging etc. with the terminal powered off, the
terminal is automatically powered on and
notification LED lights, though operations are not
available. Be careful not to connect with the AC
adapter in a place where the use is prohibited such
as in an airplane or hospital.
･
Check the connecting direction to connect correctly.
Wrong connection may cause damage.
DC Adapter 03 (optional) supplies power
from a car cigarette lighter socket (12 V/24 V).
For details, refer to the DC Adapter 03
(optional) manual.
Charging with AC adapter
Charging with DC adapter