NTN K-ECK96, Инструкция по эксплуатации

Страница: 32 / 55

32
(6) – 3 Current monitor
①
Present output current is displayed by pressing the data key during
the frequency is being displayed. It can be a guide to know if there is
any room in the operation state of load. Please note that error is
large in the region of very small current (
less than 2A
).
②
If the data key is pressed again during current is being displayed, it
returns to the voltage display screen in case of operation by the
constant voltage mode and to the % speed display screen in case of
the constant amplitude mode. Moreover, at the time of using the
multi-speed function, it returns to the speed
№ display screen.
【
List of monitor screens
】
Drive mode
Normal screen
Data key
One time press
Data key
2 time press
Data key
3 time press
Data key
4 time press
Data key
5 time press
Constant voltage mode
Voltage monitor Frequency monitor Current monitor
Voltage monitor
(Normal screen)
Same as one
time press
Same as 2 time
press
Constant amplitudemode
Resonance point tracking
mode
% speed display Voltage monitor Frequency monitor Current monitor
% speed display
(Normal screen)
Same as one time
press
At time of using multi-speed
function
（
Constant voltage mode
）
Speed № display Voltage monitor Frequency monitor Current monitor
Speed № display
(Normal screen)
Same as one time
press
At time of using multi-speed
function
(Constant amplitude mode,
Resonance point tracking mode)
Speed № display % speed display Voltage monitor Frequency monitor Current monitor
Speed № display
(Normal screen)
(7) JOG driving
It is used for the time of forced driving such as maintenance, refill of
work.
Even if driving is being stopped by the external signal or
overflow, forced driving is possible only during the run key is being
pressed.
When this function is used, please select 1 (accept JOG drive) for
the function J03.
During stopping by the external control (J02 is 0 or 1), JOG lamp
lights and it displays that JOD driving is possible.
As JOG function is ON during lamp is lighting, output is ON only
during RUN button is being pressed.
When RUN button is
disengaged, it stops.
In case that it is being driven by JOG, monitoring of data is not
possible. When the other key such as the data key is pressed during
JOG driving, the driving stops.
When it is lighting, JOG
driving is possible
Current display
Voltage display
(normal display)
ＤＡＴＡ
ＥＮＴＥＲ
Frequency display
ＤＡＴＡ
ＥＮＴＥＲ
FUNC
RESET JOG
RUN
Vib.A RUN LIMIT