3
Warning
It must not be used in a place where it exposes to water, oil or chemicals, or outdoors, or in a
place of high temperature and humidity.
There is a fear of an electric shock, a fire or a failure.
Please do not scratch, pull or forcibly bend the wiring. Moreover, when a heavy thing is put on the wiring,
or it is pinched, the wiring will be damaged. It causes a fire or an electric shock.
Please do not touch controller's output terminal during energizing the controller while even stopping.
There is a fear of an electric shock because the alternating current of maximum 200V is applied to the
output terminal.
Please do not connect AC power to the output terminal (1 and 2).
It causes a fire or the breakdown.
Foreign objects such as paper, waste wood or oil must not be allowed to enter the controller, and the
controller must not ruin its heat radiation by covering it with such as the cloth.
There is a fear of the burn or a fire, etc.
Please do not operate the switch by a wet hand.
There is a fear of an electric shock.
Please do not use it with other than the specified voltage.
It causes a fire or the breakdown.
Please turn off the power supply or the main breaker on the primary side when you replace fuses. There
is a fear of an electric shock.
Caution
The sheet metal of the controller BOX might become high temperature (50-70
℃
).
Please note that
there is a fear of the burn. Moreover, please install a space for heat radiation in the surroundings. (Refer
to P.7)
Please do not do "ON" and "OFF" of the power supply frequently.
The controller will break down.
(Please refer to the paragraph 7.-(5) the wiring of external control input in P.16)
Please do not repeat "ON" and "OFF" of the power supply in a short time.
A big inrush current flows and there is a possibility that the controller breaks down.
Please do not install it in the place where the vibration or the impact is acting.
The controller breaks down.
