RD 160.iCare+.OPM.ENG.V16 04.27.2020
p. 7
ENG
Information
To avoid confusion when inserting the consumable products, a colour coding is used:
-
For n.clean solution, yellow sticker on the bottle and receptacle
-
For the n.cid solution, grey sticker on the bottle and receptacle
4.4.2 Safety warning relating to n-cid and n-clean
Warning
•
n.cid liquid and vapour are flammable. Keep away from heat, hot surfaces, sparks, open flames
and other ignition sources. Do not smoke in the presence of n.cid. Keep container tightly closed in
a cool, dry and well-ventilated place. Do not expose to or leave in direct sunshine.
•
It is recommended to use protective glasses and gloves during handling of bottles or during
emptying of waste drawer. Avoid any contact with skin and eyes.
•
Following eye contact with n.clean, flush eyes with flowing water for several minutes holding
eyelids apart. Remove contact lenses, if present and easy to do.
•
Following n.clean ingestion: Rinse mouth and then allow the affected person to drink water.
•
n.cid causes serious eye irritation. Following eye contact with n.cid rinse cautiously with water for
several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation
persists, seek medical advice/attention
•
In case of contact of n.cid with skin, wash off immediately with soap and water. In case of skin
reactions, seek medical advice.
•
Following inhalation of n.cid, move affected person into fresh air. In case of irritation of the
airways, seek medical advice.
•
Following ingestion of n.cid, rinse mouth with water, and then drink plenty of water. Do not
induce vomiting. Seek medical advice.
4.4.3 Filling the oil tank
The oil is poured directly into the tank. To fill the oil tank, proceed as follows:
•
Shake the oil canister well
•
Unscrew the oil tank cap Fig.11
•
To avoid a spillage hazard, gently pour the oil in to the tank Fig.12
•
Fill the tank up to 20 mm from the top edge of the tank. Fig.13
•
After filling, replace the oil tank cap.
•
Once the tank is filled and the cap properly secured, close the rear top cover.
Fig.11 – Oil tank
Fig.12 – Oil filling
Fig.13 – Oil limit
Caution
•
Always use NSK oil to ensure optimal lubrication
•
Using other oil with iCare+ could lead to a failure or damage of the iCare+ and the instruments
connected to it
•
After filling the oil tank, ensure the cap is securely closed
Содержание iCare+
Страница 1: ...RD 160 iCare OPM ENG V16 04 27 2020...
