NSK iCare+, Руководство по эксплуатации

Страница: 3 / 28

RD 160.iCare+.OPM.ENG.V16 04.27.2020 p. 1
ENG
CHAPTER 1 - INTENDED USE AND USERS
1.1 Intended use
iCare+ is an automated reprocessing device performing the necessary steps of decontamination and maintenance
prior to sterilization. iCare+ is intended:
•
To purge, clean, disinfect and lubricate dental handpieces defined as rotating instruments such as straight
handpieces, contra angles and turbines.
•
iCare+ should be used only with pre-cleaned dental handpieces.
1.2 Intended users
iCare+ is a Medical Device intended to be used by all Qualified Professionals from the dental field in medical type
environments such as private clinics, hospitals, dental offices and university laboratories.
CHAPTER 2 - SAFETY INSTRUCTIONS
2.1. Safety Symbols
Please read this operating manual as it includes important safety information using the symbols below:
Symbol Description
Warning
This symbol is designed to bring to your attention hazards that could result in serious injury or
damage to the device if the safety instructions are not correctly followed. You are asked to read
closely and understand properly each of the sections concerned immediately before using your
iCare+ device.
Caution
This symbol is designed to bring to your attention hazards that could result in light or moderate
injury or damage to the device if the safety instructions are not correctly followed.
Information
Text preceded by this symbol contains useful information for using your iCare+ device.
2.2 General safety instructions
Warning
The manufacturer, installer and importer are only responsible for the device's safety, reliability and
performance if the aforementioned points have been respected
The user is advised to comply with the following instructions:
• Please report any serious incident that may occur in connection with the device and its
consumables to the manufacturer as well as to your national authority
•
The device must be used in accordance with the instructions given in this user's manual in terms
of safety precaution and use of the system
•
The power supply of the location where iCare+ will be used must comply with IEC
requirements, or with local regulations in force
Warning
iCare+ device has been designed in accordance with current safety standards. Nevertheless, it is
essential to comply with important safety measures in order to avoid any potential incident or even
accident. Therefore, the safety recommendations below have to be taken into consideration.
•
Use iCare+ only indoors
•
Do not install or use iCare+ near a naked flame due to the risk of explosion
•
Do not install or use iCare+ in direct contact with sunlight
•
Ensure that the iCare+ device is placed in a well ventilated area
•
Store iCare+ at temperature between 0°C and 50°C and humidity rate under 80%