NSK iCare+, Руководство по эксплуатации

Страница: 14 / 28

RD 160.iCare+.OPM.ENG.V16 04.27.2020 p. 12
ENG
5.4 Programming the iCare+ device
5.4.1 Function of the control panel
The Control panel is composed of a series of control buttons and light operating indicators. As shown Fig.23, and
24, the control panel includes 7 operating keys and 25 light indicators as follows:
•
(K1) Start-up key
This key is used to start the operating cycle. Pressing and holding this key will abort the cycle
•
(K2) to (K5) Instrument keys
These four keys switches enable to select/deselect the instruments to be reprocessed as well as to select the
volume of lubricant to be dispensed
•
(K6) Operating cycle key
This key is used to select the reprocessing cycle to be performed as follows:
-
Full cycle: Cl Disinf Lubrication
-
Partial cycle: Cl Lubrication
-
Short cycle: Lubrication only
•
(K7) Spray key
In conjunction with (K2) to (K5) this key is used to define if the handpiece has an external spray channel or no
spray channel
Fig.23 – Operating Keys
•
(1) Cycle status indicators
These indicators show which step of the reprocessing cycle is in progress
•
(2) Warning indicators
When lit these six indicators display “Warning information” for:
-
Low consumable level: n-id, n-clean, oil
-
Safety sensor: drawer, air pressure, door status
•
(3) Instrument selection indicators
When lit these indicators show which instruments are selected and the quantity of the lubricant to be delivered
•
(4) Spray indicators
In conjunction with (3) these indicators display if the selected handpieces have been defined with an external
spray channel or no spray channel
•
(5) Mode indicators
These indicators are used to show the selected reprocessing cycle
Fig.24– Light Indicators