NSK iCare+, Руководство по эксплуатации

Страница: 18 / 28

RD 160.iCare+.OPM.ENG.V16 04.27.2020 p. 16
ENG
CHAPTER 6: USER MAINTENANCE
iCare+ requires two different types of maintenance:
•
Routine maintenance, periodically performed by the user such as cleaning of the device
•
Specific maintenance performed by a dental technician: e.g. annual validation and repair
Caution
Periodical validation and repair are limited exclusively to professional dental installers who have
been trained and qualified under the control of NSK
6.1. General cleaning guidelines
Caution
•
Cleaning operations should be performed only after having disconnected the iCare+ from the main
power supply
•
Do not smoke in the room where the device is kept
You should clean the iCare+ as recommended below:
•
Always use a soft cloth to clean the metallic and plastic parts of the device
•
Only use detergents that contain a very low level of alcohol (with no protein fixation agent)
•
Never attempt to clean areas that are difficult to access with sharp objects
•
Be careful when cleaning the Control panel and never use aggressive detergents
6.2 General maintenance guidelines
Frequency / Number of cycles Operation Reference Section
Every week 50 Cleaning the treatment chamber -- 6.2.1
Every week 50 Cleaning the external parts -- 6.2.2
2-3 times per week 15 Emptying the used products drawer -- 6.2.3
Every week 50 Cleaning the drawer -- 6.2.4
When needed Replacing the O’ring On demand 6.2.6
When blown Replacing the fuse(s) of the supply inlet On demand 6.2.7
When needed Replacing the junction support blister S103106 6.2.5
Each year Annual validation 4.5.2
6.2.1 Cleaning the treatment chamber
As the door is removable, the treatment chamber can be easily cleaned. To do so, proceed as follows:
•
Open the door
•
If in place, disconnect and remove the instruments
•
Pinch the 2 spring-loaded tabs on the door (in red)
•
Remove the door to easily access the chamber
•
Use a soft cloth or a sponge to clean the chamber
•
If necessary, rinse it
•
Follow the same procedure to clean the door
•
We advise the use alcohol wipes for this part of the device to ensure you remove with
efficacy possible stains
•
Once complete replace the door
•
Switch on the device and check the proper activation of the door sensor: Fig. 24 (2)